As you know, having the correct range of resistance is important and the resistance cells you purchased allow you even greater flexibility with your PowerLung if:
|
|
Inhale Resistance Cell
|
Exhale Resistance Cell
|
Removing the Inhale Resistance Cell
1. | Remove the new resistance cell from the recloseable bag. | |
2. | Hold the PowerLung with the Mouthpiece facing up and the Inhale Resistance Cell facing down. | ![]() |
3. | Turn the Inhale Resistance Cell slowly and gently in a counterclockwise direction. When the Inhale Resistance Cell decreases beyond “1″, it will detach from the Inhale Chamber of your PowerLung. | ![]() |
4. | Place this Resistance Cell you have removed into the reclosable bag for safe, clean storage. |
Removing the Exhale Resistance Cell
1. | Remove the new resistance cell from the recloseable bag. | |
2. | Hold the PowerLung in a horizontal position with the Exhale Resistance Cell facing down. | ![]() |
3. | Turn the Exhale Resistance Cell slowly and gently in a counterclockwise direction. When the Exhale Resistance Cell decreases beyond “1″, it will detach from the PowerLung. | ![]() |
4. | Place this Resistance Cell you have removed into the reclosable bag for safe clean storage. |
Attach the Inhale Resistance Cell
![]() |
|
1. | Take the Inhale Spring and place it inside of the Inhale Cap so that it rests around the center of the inside of the Inhale Cap. |
![]() |
|
2. | Holding your PowerLung in a vertical position with the Mouthpiece facing up and the empty Inhale Chamber is facing down, take the Inhale Resistance Cell and slide it into the Inhale Chamber of the PowerLung. |
![]() |
|
3. | Push the Inhale Resistance Cell deep into the Inhale Chamber while turning it clockwise. The Inhale Resistance Cell will attach to the Inhale Valve Stem after a few turns. |
4. | Replace the Exhale Resistance Cell. |
Attach the Exhale Resistance Cell
![]() |
|
1. | Take the Exhale Spring and place it inside of the Exhale Cap so that it rests around the center of the inside of the cap. |
![]() |
|
2. | Place the Exhale Valve inside the Exhale Spring where the stem of the Exhale Valve goes down the inside of the Exhale Spring and the Exhale Valve head rests on top of the Exhale Spring (see above diagram). |
![]() |
|
3. | Hold your PowerLung in a horizontal position with the empty Exhale chamber facing down and bring the Exhale Resistance Cell to the Exhale chamber by coming underneath the PowerLung. |
![]() |
|
4. | Turn the Exhale Resistance Cell clockwise so that it attaches to the Exhale chamber. |
5. | Replace the Inhale Resistance Cell. |